Forestry Mulchers

w-forrest

w-forrest

от 75 в 140 HP

Мульчер для лесного хозяйства с электронно сбалансированным ротором, комплектуется вращающимися молотками. Предназначен для измельчения запущенных зарослей, кустарников и растений диаметром до 18 см. Режущий узел состоит из двойной внутренней рамы, полностью выполненной из высокопрочной и износостойкой стали. 2 ряда установленных внутри контрножей обеспечивают великолепное качество измельчения. Варианты рабочей ширины: 148-170-192-223

espace

espace

от 35 в 100 HP

Brush cutter built for agricultural work, ideal for cleaning green areas in hard conditions, plantations, different kind of crops, pastures with stones, olive groves or orchards. The quality of the material with which our machines are built, gives them great resistance but also lightness allowing a lower fuel consumption. Height-adjustable side skids that allow you to adjust the desired cut. Frame with reinforcements in the upper part, a rotor equipped with chains or blades, front and rear protection chains, threepoint linkage with chains fixing to keep the machine fixed in the ground while working. Gearbox 540 R.P.M., cardan shaft with freewheel in the Espace S and L range, cardan with freewheel and slip clutch in the XL range. Universal rotor for mounting chains or knives at the same time.

ss-forrest

ss-forrest

от 50 в 100 HP

The new evolution of Forestry mulcher for branches and shrubs up to 15 cm in diameter, but also evolved for needs in shredding of orchards and vineyard pruning residues whilst coupled with low-power tractors.
The new rotor with FLANGES TOOL LIMITER (FTL) technology has steel flanges which allow to limit the depth of the cutting tools, reducing the demand for power and ensuring maximum performance.
Equipped with screwed and interchangeable adjustable support slides, with four rows of counter-knives, it guarantees a fine and homogeneous shredding, with hydraulically adjustable hood opening and monolithic body completely in 6 mm Hardox.
Double row of screwed chains limits the escape of shredded material protecting the operator.
Fitted with mechanically adjustable Arch for pushing down branches as well as protecting the tractor and also helps feed the material into the rotor for shredding.

bears forrest

bears forrest

от 75 в 140 HP

Machine with specially reinforced frame to withstand the axial loads caused by the movement of the tractor in extreme conditions. Mulchers designed for all shredding operations of bushes, branches, and trees up to a maximum diameter of 18/20 cm depending on the condition of the product to be shredded. Fitted with octagonal forest type rotor with retractable forged hammers. Machine equipped with screw adjustable and interchangeable side skids, with two rows of counter-knives that ensure fine and homogeneous shredding and hydraulic adjustment of the hood. Double Hardox frame, completely closed to minimise dust,and with Intigrated protected hydraulic cylinder, double Hardox frame, completely closed / dustproof. Double row of front protection chains, with screwed plates that limit the escape of shredded material and protect the operator and the tractor / cabin. Fitted with mechanically adjustable Arch for pushing down branches as well as protecting the tractor and also helps feed the material into the rotor for better shredding. Double-edged tools that can be reversed when worn for extended life.

hulk forrest

hulk forrest

от 80 в 160 HP

Mulchers designed for all shredding operations of bushes, branches and trees up to a maximum diameter of 25 cm, fitted with helical
forestry rotor Ø 450 mm with fixed tools.
The specially reinforced frame built to withstand the axial loads caused by the movement of the tractor in demanding conditions is
equipped with screw adjustable and interchangeable support skids, with two rows of HARDOX counter-blades that guarantee a fine and
homogeneous shredding. The Double Hardox frame complete with hydraulic adjustable hood incorporates the integrated and protected
hydraulic cylinder
Double row of front protection chains, with screwed plates that limit the escape of shredded material and protect the operator and the
tractor / cab.
Fitted with mechanically adjustable Arch for pushing down branches as well as protecting the tractor and helping feed the material into
the rotor for better shredding. On request it can also be hydraulically operated for greater ease of use and comfort.
Fixed tools in wear resistant tungsten carbide for highly professional and difficult jobs.

hulk forrest-dt

hulk forrest-dt

от 80 в 160 HP

Mulchers designed for all shredding operations of bushes, branches and trees up to a maximum diameter of 25 cm, fitted with helical
forestry rotor Ø 450 mm with fixed tools.
The specially reinforced frame built to withstand the axial loads caused by the movement of the tractor in demanding conditions is
equipped with screw adjustable and interchangeable support skids, with two rows of HARDOX counter-blades that guarantee a fine and
homogeneous shredding. The Double Hardox frame complete with hydraulic adjustable hood incorporates the integrated and protected
hydraulic cylinder
Double row of front protection chains, with screwed plates that limit the escape of shredded material and protect the operator and the
tractor / cab. Fitted with mechanically adjustable Arch for pushing down branches as well as protecting the tractor and helping feed the
material into the rotor for better shredding. On request it can also be hydraulically operated for greater ease of use and comfort.
Fixed tools in wear resistant tungsten carbide for highly professional and difficult jobs. The DT series is the machine with double
transmission that allows the rotor to work with an improved power distribution, ensuring high performance and maximum mechanical
resistance when cutting high dimensions.
Developed for professionals’ people looking for the complete machine.

hulk forrest ftl

hulk forrest ftl

от 80 в 160 HP
hulk forrest dt ftl

hulk forrest dt ftl

от 80 в 160 HP
wild-s dt

wild-s dt

от 160 в 240 HP

Forestry mulcher with electronically balanced rotor, with fixed tungsten carbide inserts and centralized lubrication. Recommended for the shredding of uncultivated vegetation, shrubs and plants up to 30 cm in diameter. Transmission takes place through a double transmission with high performance kevlar belts. The chopping equipment consists of a double internal frame built entirely in HARDOX®. The 2 rows of counter-knives installed inside guarantee excellent quality of crumbling.

wild forrest dt

wild forrest dt

от 160 в 240 HP

Forestry mulcher with electronically balanced rotor, with fixed tungsten carbide inserts and centralized lubrication. Recommended for the shredding of uncultivated vegetation, shrubs and plants up to 30 cm in diameter. Transmission takes place through a double transmission with high performance kevlar belts. The chopping equipment consists of a double internal frame built entirely in HARDOX®. The 2 rows of counter-knives installed inside guarantee excellent quality of crumbling.

multi wild forrest dt

multi wild forrest dt

от 250 в 400 HP

Forestry mulcher with packer roller and electronically balanced rotor, with fixed tungsten carbide inserts and centralized lubrication. Recommended for the shredding of uncultivated vegetation, shrubs and plants up to 30 cm in diameter. Transmission takes place through a double transmission with high performance kevlar belts. The chopping equipment consists of a double internal frame built entirely in HARDOX®. The 2 rows of counter-knives installed inside guarantee excellent quality of crumbling.

super forrest

super forrest

от 325 в 550 HP

Мульчер для лесного хозяйства с электронно сбалансированным ротором, комплектуется фиксированными режущими вставками из карбида вольфрама. Предназначен для измельчения запущенных зарослей, кустарников и растений диаметром до 45 см. Двойная трансмиссия на 12 ремнях POWERBAND. Режущий узел состоит из монолитного корпуса толщиной 15 мм, выполненного из высокопрочной и износостойкой стали. Благодаря самоцентрирующейся шестеренчатой коробке передач кардан работает только в перпендикулярном положении относительно почвы, в том числе при наклоне фрезы под углом 90°. 2 ряда установленных внутри контрножей обеспечивают великолепное качество измельчения. Предлагаемая рабочая ширина: 260 см

Запросить дополнительную информацию